Products

 
 

Air Cooled Heatsinks - Fabricated Heatsink Assembly - Glued Aluminum Heatsinks

 

glued aluminum heatsink

Overview

If you have determined that Fabfin characteristics using aluminum do not meet your needs we offer an adhesive solution for a fin spacing of 3mm (0.118”) and a fin thickness of 1mm (0.040”).

There are no limitations on fin height but we do recommend installing a spacer bar at the fin tips for fin heights greater than 100mm (4”).

There are no limitations on baseplate thickness over 13mm (0.5”). Minimum thickness on smaller heatsinks is 9mm (0.35”).

Maximum width of a single piece is 508mm (20”).
 


 
 
 
Formerly R-Theta Thermal Solutions. Call us for more information at 905-795-0077.